The QL NE100 is a very powerful processor allowing complex programming to achieve project requirements. It is also a QL NET to Ethernet interface module which allows communication to the system via Ethernet. The QL NE100 has both QL NET and DMX-512 bus. The control devices connect to the QL NET bus and the control actuators connect to the DMX-512 bus. When used in this manner, the control actuators are configured to function in DMX-512 mode. The DIN rail mountable module is totally self-contained with its own integral PSU. It can be fitted along with other modules in a panel of can be in separate panel to install in a central location to control multiple panels. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The controller can control up to 512 channels (including lighting control, shade control and FCU control channels) and control devices to control up to 128 different zones. The controller gives flexibility to program different lighting scenes for each zone.

• Complex programming capabilities
• Controls up to 512 different channels including lighting control, shade control, FCU control etc.
• Controls up to 128 different control zones
• Connects to control devices via QL NET bus and to control actuators via DMX-512 bus
• In-built calendar timer
• In-built astronomical timer
• Built-in web interface for configuration
• DIN rail mountable
• Configurable via buttons on module without any computer

Any output of this 4 Channel module can be programmed for 'switched mode' or 'Phase Dimming' or 'Fluorescent Dimming'. The Din rail mountable module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

Specification:

• Power Supply: 90 – 240V AC
• Protocol: DMX-512, QL-Net
• Output 5A per channel max. Total 12A max.
• DMX signal connector: 6P 6C PHONEJACK x 2, 4-pin terminal x 1.
• Dimension: 190mm(W) x 88mm(H) x 57mm(D)
• Weight: 500g

Features:

• 4 channels output. Each channel includes one AC OUT power supply for fluorescent lamp and one DC 0-10V for fluorescent lamp dimming.It also can be the dimmer pack for conventional (incandescent) lamps.
• Accept standard DMX-512 signal.
• Can set the OFF time for AC OUT power from 1 second to 99 seconds.
• Can set the fade time for each scene.
• Up to 99 zones setting.
• Din-rail Mountable.

Any output of this 4 Channel module can be programmed for 'switched mode' or 'Phase Dimming' or 'Fluorescent Dimming'. The module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

Specification:

• Power Supply: 90 – 240V AC
• Protocol: DMX-512, QL-Net
• Output 10A per channel max. Total 20A max.
• DMX signal connector: 4-pin terminal x 1.
• Dimension: 200mm(W) x 75mm(H) x 180mm(D)

Features:

• 4 channels output. Each channel includes one AC OUT power supply for fluorescent lamp and one DC 1-10V/DALI for fluorescent lamp dimming.It also can be the dimmer pack for conventional (incandescent) lamps.
• Accept standard DMX-512 signal.
• Can set the OFF time for AC OUT power from 1 second to 99 seconds.
• Can set the fade time for each scene.
• Up to 99 zones setting.

The QL-8012 is an 8 channel dimming/switching module designed for small to medium sized lighting automation requirements. Any output of this module can be programmed for 'switched mode' or 'Phase dimming mode'. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

Specification:

• Power Supply: 90 – 240V AC
• Protocol: DMX-512, QL-Net
• Output 5A per channel max. Total 12A max.
• DMX signal connector: 6P 6C PHONEJACK x 2, 4-pin terminal x 1.
• Dimension: 190mm(W) x 88mm(H) x 57mm(D)
• Weight: 500g

Features:

• DMX-512/QL-NET(RS-485)
• Din-rail mounted.
• 8 channels leading-edge (forward phase control)output.
• Each channel can be set as dimming/switch mode.
• Up to 99 zones setting.
• Connectable to QLCP series control panel.

The QL 1210 is a 12 channel dimming/ switching power pack module designed for large lighting automation requirements. The module is designed for higher dimming loads. The module is perfectly designed for ease of maintenance. Any two channels set can be removed and replaced from the unit without switching off the power of the whole unit. The replacement can be done in a matter of seconds. The entire configuration for the 12 channels is done and stored in the QL-CPU unit of the module. Hence physical replacement of any channel does not require any reprogramming to restore functionality. The channels can be simply ‘hot swapped’. The module can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. Any output of this module can be programmed for 'switched mode', 'Phase dimming mode' or '1-10V dimming mode' allowing the same channels to be used for either leading edge phase dimming or 1- 10V dimming. This module can be fitted along with protection devices in a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability. Each channel has an override switch which overrides the output control via QL NET/DMX-512 commands and transfers the control of output level to the override slider of the channel. Each channel also has a bypass switch which bypasses any dimming and sets the output of that channel to 100%. After power loss, on restoration the system will restore each channel to the 'last selected state' prior to the power loss.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Accepts standard DMX-512 signal
• Up to 99 zones configurable in QL NET mode
• Up to 8 Programmable partition zones
• Up to 8 programmable scenes in QL NET mode
• Manual override switch and slider per channel
• Manual bypass switch per channel
• Each channel configurable as leading edge phase dimming, 0-10V dimming or switching mode
• Built-in clock and timer
• Module Temperature readable on LCD display
• Auto shutdown on overload
• Hot swappable channels
• Twin channel 10A insert available
• Single channel 20A insert available

QL SW420 is a four (4) Channel switching module with current rating of 20A per channel. The Din rail mountable module is totally self contained with its own integral PSU and can be configured as part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.

Specification:

• Power Supply: 90 – 240V AC
• Protocol: DMX-512, QL-Net
• Output 5A per channel max. Total 12A max.
• DMX signal connector: 6P 6C PHONEJACK x 2, 4-pin terminal x 1.
• Dimension: 190mm(W) x 88mm(H) x 57mm(D)
• Weight: 500g

Features:

• DMX-512/QL-NET(RS-485)
• Din-rail mounted.
• 8 channels leading-edge (forward phase control)output.
• Each channel can be set as dimming/switch mode.
• Up to 99 zones setting.
• Connectable to QLCP series control panel.

QL SW820 is an eight (8) Channel switching module with current rating of 20A per channel. The Din rail mountable module is totally self contained with its own integral PSU and can be configured as part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard

Specification:

• Power Supply: AC 90 – 270V AC 50/60 Hz
• Protocol: DMX-512, QL-Net, Q-BUS
• Output 20A per channel max.
• DMX signal connector, 4-pin Screw terminal x 1.
• Dimension: 190mm(W) x 88mm(H) x 57mm(D)
• Weight: 500g

Features:

• Standard DMX-512 signal.
• Din rail-mounted. Manual setting available and easy to operate.
• 8 channels dry contact, each can be set as ON/OFF/AUTO mode individually.
• Each channels maximal output can be 10A.
• Up to 99 zones synchronization. (99 devices work together)
• ay time setting (0.1S~10S) for each channel to avoid current surge.
• Connectable to QL series control panels, each of them can work independently or synchronously.

The QL-CC01 is a single channel shade control module designed for small to medium sized automation requirements. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. The module controls shade motors with provision for dual line input for clockwise and anti-clockwise direction. The same module can be used for AC motors, DC motors and RF controlled motors provided that RF interface is available from the motor manufacturer. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore the fan coil unit to setting prior to the power loss.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Accepts standard DMX-512 signal
• DIN rail mountable
• Up to 99 zones configurable in QL NET mode
• Clockwise / Anti-clockwise time settable
• Manual control buttons for shade control
• Controls both AC and DC motors

The QL-CC04 is a four channel shade control module designed for small to medium sized automation requirements. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. The module controls shade motors with provision for dual line input for clockwise and anti-clockwise direction. The same module can be used for AC motors, DC motors and RF controlled motors provided that RF interface is available from the motor manufacturer. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore the fan coil unit to setting prior to the power loss.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Accepts standard DMX-512 signal
• DIN rail mountable
• Up to 99 zones configurable in QL NET mode
• Clockwise / Anti-clockwise time settable
• Manual control buttons for shade control
• Controls both AC and DC motors

The QL-FM04 is a 4 channel control module designed for small to medium sized lighting automation requirements. Any output of this module can be programmed for 'Fan control mode' or '1 dimming mode'. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Each channel configurable as fan mode or 0-10V dimming mode
• Up to 99 zones configurable in QL NET mode
• Up to 8 programmable scenes in QL NET mode
• Accepts standard DMX signal
• DIN rail mountable
• Module current output viewable on the LCD display
• Manual adjustable dimming level for each channel
• In-built current detection function
• Auto shutdown on overload

The QL-405 is a 4 channel dimming/switching module designed for small to medium sized lighting automation requirements. Any output of this module can be programmed for 'switched mode', 'Phase dimming mode' or '1-10V dimming mode'. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Each channel configurable as leading edge phase dimming, 0-10V dimming or switching mode
• Up to 99 zones configurable in QL NET mode
• Up to 8 Programmable partition zones
• Up to 8 programmable scenes in QL NET mode
• Accepts standard DMX-512 signal
• DIN rail mountable
• Module current output viewable on the LCD display
• Manual adjustable dimming level for each channel
• In-built current detection function
• Auto shutdown on overload

Any output of this 4 Channel module can be programmed for 'switched mode' or 'Phase Dimming' or 'Fluorescent Dimming'. The module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

Specification:

• Power Supply: 90 – 240V AC
• Protocol: DMX-512, QL-Net
• Output 10A per channel max. Total 20A max.
• DMX signal connector: 4-pin terminal x 1.
• Dimension: 200mm(W) x 75mm(H) x 180mm(D)

Features:

• 4 channels output. Each channel includes one AC OUT power supply for fluorescent lamp and one DC 1-10V/DALI for fluorescent lamp dimming.It also can be the dimmer pack for conventional (incandescent) lamps.
• Accept standard DMX-512 signal.
• Can set the OFF time for AC OUT power from 1 second to 99 seconds.
• Can set the fade time for each scene.
• Up to 99 zones setting.

The QL 1210 is a 12 channel dimming/ switching power pack module designed for large lighting automation requirements. The module is designed for higher dimming loads. The module is perfectly designed for ease of maintenance. Any two channels set can be removed and replaced from the unit without switching off the power of the whole unit. The replacement can be done in a matter of seconds. The entire configuration for the 12 channels is done and stored in the QL-CPU unit of the module. Hence physical replacement of any channel does not require any reprogramming to restore functionality. The channels can be simply ‘hot swapped’. The module can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. Any output of this module can be programmed for 'switched mode', 'Phase dimming mode' or '1-10V dimming mode' allowing the same channels to be used for either leading edge phase dimming or 1- 10V dimming. This module can be fitted along with protection devices in a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability. Each channel has an override switch which overrides the output control via QL NET/DMX-512 commands and transfers the control of output level to the override slider of the channel. Each channel also has a bypass switch which bypasses any dimming and sets the output of that channel to 100%. After power loss, on restoration the system will restore each channel to the 'last selected state' prior to the power loss.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Accepts standard DMX-512 signal
• Up to 99 zones configurable in QL NET mode
• Up to 8 Programmable partition zones
• Up to 8 programmable scenes in QL NET mode
• Manual override switch and slider per channel
• Manual bypass switch per channel
• Each channel configurable as leading edge phase dimming, 0-10V dimming or switching mode
• Built-in clock and timer
• Module Temperature readable on LCD display
• Auto shutdown on overload
• Hot swappable channels
• Twin channel 10A insert available
• Single channel 20A insert available

The QL-DL01 is a single channel DALI control module for small to medium sized lighting automation requirements. Each output can handle up to 64 DALI devices. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

• Operates in Stand-alone mode and centralized mode
• Each output can control up to 64 DALI devices
• Software allows addressing of connected DALI devices
• Software allows addressing of connected DALI devices
• DIN rail mountable

Any output of this 8 Channel module can be programmed for 'switched mode' or 'Phase Dimming' or 'Fluorescent Dimming'. The module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the 'last scene selected' prior to the power loss.

The QL-305LED is a 3 channel RGB LED constant voltage pulse width modulated output driver / controller. The input voltage to the module is to be provided by an external power supply unit, rating of which has to be as per the LED light fitting being connected to the QL-305LED module. The module accepts external DMX-512 signals to control the LED lights connected to it. It also has 31 built-in modes to control the connected LED lights without any external DMX-512 signal. The DIN rail mountable module is totally self contained and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Up to 99 zones configurable in QL NET mode
• Up to 8 programmable scenes in QL NET mode
• Accepts standard DMX-512 signal
• DIN rail mountable
• Built-in 31 modes for auto control / color changing

The QL-1025LED is a single channel LED constant voltage pulse width modulated output driver. The output voltage is adjustable via a rotary knob on the module. The current limit is also adjustable via a rotary knob. The module gives perfect linear dimming even at the lower dimmed output to the LED lights. The module accepts 1-10V analog input to dim the connected LED lights.

• 1-10V Dimmable
• Output voltage adjustable
• Current limit adjustable

The QL-PCA1 is a single channel fan coil unit control module designed for small to medium sized automation requirements. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. The thermostat unit in the system allows the user to set the desired fan speed and temperature. QL PCA1 output state is controlled based on the user set temperature and the current temperature (measured by built-in temperature sensor in the thermostat). This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore the fan coil unit to setting prior to the power loss.

• Operates in Stand-alone mode and centralized mode with QL NE100
• Accepts standard DMX-512 signal
• DIN rail mountable
• Up to 99 zones configurable in QL NET mode
• 3 fan speed control
• Separate heat and cool control
• Manual control buttons for fan speed control and valve / heating element control

The QL SCENESET is a 6 channel dimmer module with built in user interface for scene selection. It is meant for small to medium sized projects. The front face of the module has buttons for scene selection as well as individual channel control. It is a very user friendly module with easy configuration steps to manage the module from the buttons on the front face. It has built in clock and timers which are easily manageable by the end user itself. The module can also be connected to an external control device like a lighting control plate to control it from a remote location. The QL SCENESET is a 6 channel dimmer module with built in user interface for scene selection. It is meant for small to medium sized projects. The front face of the module has buttons for scene selection as well as individual channel control. It is a very user friendly module with easy configuration steps to manage the module from the buttons on the front face. It has built in clock and timers which are easily manageable by the end user itself. The module can also be connected to an external control device like a lighting control plate to control it from a remote location.

• Single phase input
• 6 leading edge phase dimmed outputs
• Easily replaces conventional switches
• Each channel programmable to switching or dimming
• Built-in clock and 20 timers
• Settable fade rates
• Up to 99 zones configurable in QL NET mode
• Accepts standard DMX-512 signals