Qlite offer standard lighting control and automation panel. Panels can be built for customized requirements also based on the project requirement. The panels are factory prewired with suitable modules and with or without input and outgoing protection gears based on the project requirements and comply with the local regulations. All panels are designed to use the same interchangeable dimming modules.
The panels are manufactured in compliance with all the applicable EC specifications EN5501 on EMC and low voltage directives. Standard panel range includes 6 channel, 12 channel, 18 channel and 24 channel panels which are ex-stock. The customized panels are made to project requirement. The metal construction panels have been designed and built for safety, reliability and serviceability. The panels are finished in RAL 7024 Graphite Grey or RAL 7032 Grey epoxy polyester semi-gloss color. The heat dissipation inside the panel is by natural convection and are not used as heat sink themselves
- Standard ex-stock sizes – 6, 12, 18 and 24 channel
- Conventional cooled
- RAL 7024 and RAL 7032 color
- Epoxy polyester semi-gloss color
- Extra DIN rail space for future use
The QL PS1202 is a 12V DC power supply module for the QL NET bus. It delivers the power to the bus devices that take power from the bus. Most of these devices include the control devices or the user interfaces. The DIN rail mountable module is totally self-contained and it does not communicate on the bus. It only feeds power to the bus.
The module has a voltage adjust knob for finely adjusting the output voltage to + 0.5V DC.
- Maximum 2A output
- DIN rail mountable
- Fine adjustment of output voltage available
The QL 105R is a QL NET bus isolator module. It operates on 12V DC which it takes from the QL NET. The purpose of this module is expansion of the QL NET bus and signal isolation for devices being powered up from different power sources. It just received the QL NET signal on one terminal from the Qlite system and gives to the other terminal with signal isolation. The metal construction has been designed and built for safety, reliability and serviceability with top and bottom keyhole fixing. It is required in both standalone as well as a centralized system where control devices are more or the distances between control devices are large.
- Easy to install in back boxes as small in size
- Isolates QL NET signal
- Useable to make star connections
The QL IR05 is an infrared remote control for controlling Qlite lighting control and automation system. Qlite control plates have a built-in IR sensor which can read the IR signal from this remote control. It is battery operated with simple 6 scene control buttons with master off and raise and lower buttons.
- Simple IR Transmitter
- Six scene + Master raise, lower and off
QL NET HUB module is a QL NET control signal splitter/isolator module. It is used for star connections of QL NET buses and expansion of QL NET bus for larger projects. For higher power requirements on each bus, an additional power supply is to be added to each bus separately.
- Connect up to 20 QL NET devices on each bus.
- Supplies 12V DC for the devices on the bus
- Allows star connection of QL NET devices
- Additional power supply to be added to support more devices
The QL DMX Splitter module is a simple DMX-512 signal splitter module. Each bus of DMX-512 can connect to up to 32 devices. If there are more than 32 devices, a signal splitter/isolator is required. The module is also used in places where a star connection is required between the DMX-512 buses. The module comes in rack mounting form with one pair of DMX in connector with 8 split outputs.
- 8 way DMX-512 splitter
- Each output is photo-isolated