The QL 102E is an RS232 interface module. It operates on 12V DC which it takes from the QL NET bus and converts RS232 commands into QL NET commands to control Qlite systems. This module is used to control Qlite system via any 3rd party system capable of giving RS232 hexadecimal commands. The metal construction has been designed and built for safety, reliability and serviceability with top and bottom keyhole fixing. It can be used in both standalone as well as a centralized system.
- RS232 – QL NET convertor
- Accepts hexadecimal commands
- Allows control of Qlite system via 3rd party systems
The QL IP2SL01 is a single port IP to Serial interface module. The module allows integrating audio visual equipment which can be controlled by serial commands. It allows control of such devices via iPad, Tablet or any other 3rd party android device. It has a robust construction with small size and can be installed easily hidden anywhere near the device to be controlled. The serial commands of the device are needed to set parameters for the serial port and program the commands.
- IP to Serial interface
- Serial parameter settings
- Controls any 3rd party device controllable via serial commands
The QL-IR04R is a four channel infrared learner/transmitter module. It is used for control of various devices that are controllable via infrared remote controls. The device can read and learn codes from any IR remote control and stores in its internal memory. The module can then transmit any code on any of the output channels based on a pre programmed configuration.
The module sits on the QL NET bus and takes power from the bus. It transmits IR codes to IR output ports based on the command given to it on the QL NET bus. The metal construction has been designed and built for safety, reliability and serviceability with top and bottom keyhole fixing. It can be used in both standalone as well as a centralized system. It can be programmed to transmit up to 16 IR codes upon receipt of a single command and it can store up to 2048 codes divided into 4 separate banks.
- 4 infrared output terminals
- Stores up to 2048 commands
- Operates in both standalone and centralized system
- Able to transmit up to 16 IR codes on a single command
- Configurable via a PC based software
The QL IP2IR03 is a 3 port IP to Infrared converter module. The module allows integrating audio visual equipment which can be controlled by infrared signals. It allows control of such devices via iPad, Tablet or any other 3rd party android device. It has a robust construction with small size and can be installed easily hidden anywhere near the TV or audio system to be controlled. IR probe connects from the module to the device to be controlled.
- IP to Infrared interface
- Allows one IR blaster on last port
- Controls any 3rd party device controllable via IR signal
Dry Contact Interface
The QL-S1 is a single channel closing contact sensing module. The module can be used with conventional switches or any other device capable of giving a closing contact. It generates appropriate QL NET commands on sensing the closing contact depending on the configuration. The small size and plastic casing is appropriate to install it in a standard single gang 3' X 3' back box behind any conventional switch. It can be used as a part of a stand-alone system or as a part of a central system.
- Closing contact sensor
- Generates QL NET commands
- Small and compact
The QL-S8 is an 8 channel auxiliary input module. The DIN rail mountable module is totally self-contained and the metal construction has been designed and built for safety, reliability & serviceability. It can be a part of a standalone system or a centralized system. It senses closing contacts on each of the 8 inputs and gives a preprogrammed command to the QL NET but depending on the contact status of each input. Each of the channels has to be pre programmed to give a command on sensing a closing contact. The channels can be put in disabled mode also in which no commands will be executed. Each of the channels can be given a time window, within which only it will be operational. Outside that time window, the channels shall not execute any command even on sensing contact activity.
The QL J600 is a compact, embedded controller/server platform. It combines integrated control, supervision, data logging, alarming, scheduling and network management functions with Internet connectivity and web serving capabilities in a small, compact platform. The QL J600 makes it possible to control and manage external devices over the Internet and present real-time information to users in web-based graphical views. The QL J600 is ideal for smaller facilities, remote sites, and for distributing control and monitoring throughout large facilities. Optional input/output modules can be plugged in for applications where local control is required. The QL J600 also supports a wide range of field busses for connection to remote I/O and standalone controllers. In small facility applications, the QL J600 is all you need for a complete system.