Energy Management
Download BrochureController
Relays

QL SW810
The QL-SW810 is an 8 channel switching relay module designed for small to medium sized lighting automation requirements. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. Download BrochureDownload Video
QL SW420
The QL-SW420 is a 4 channel switching relay module designed for small to medium sized lighting automation requirements. The DIN rail mountable module is totally self contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode. Download BrochureDownload VideoAuxiliary Input Modules

QL S1
The QL-S1 is a single channel closing contact sensing module. The module can be used with conventional switches or any other device capable of giving a closing contact. It generates appropriate QL NET commands on sensing the closing contact depending on the configuration. The small size and plastic casing is appropriate to install it in a standard single gang 3” X 3” back box behind any conventional switch. It can be used as a part of a stand-alone system or as a part of a central system. Download BrochureDownload Video
QL S8
The QL-S8 is an 8 channel auxiliary input module. The DIN rail mountable module is totally self-contained and the metal construction has been designed and built for safety, reliability & serviceability. It can be a part of a standalone system or a centralized system. Download BrochureDownload VideoAV Interface Module

QL 102E
The QL 102E is an RS232 interface module. It operates on 12V DC which it takes from the QL NET bus and converts RS232 commands into QL NET commands to control Qlite systems. This module is used to control Qlite system via any 3rd party system capable of giving RS232 hexadecimal commands. The metal construction has been designed and built for safety, reliability and serviceability with top and bottom keyhole fixing. It can be used in both standalone as well as a centralized system. Download BrochureDownload VideoUser Interface Modules

QL CP106
The QL-CP106 is a push button lighting control plate. It is available in a wide range of finishes and models. It is an elegant user interface for control of lights and curtains by the user. Download Brochure
QL CP108
The QL-CP108 is a push button lighting control plate. It is available in a wide range of finishes and models. It is an elegant user interface for control of lights and curtains by the user. Download Brochure
QL CPG201
The QL-CPG201 is a glass finish feather touch lighting control plate. It is available in many finishes. It is an elegant user interface for control of lights and curtains by the useDownload Brochure
QL CPG108
The QL-CPG108 is a glass finish feather touch lighting control plate with 10 buttons. It is available in many finishes. It is an elegant user interface for control of lights and curtains by the user. Download Brochure
QL CPT301
The QL-CPT301 is a 5.7” LCD color touch screen for lighting and automation control. It is an elegant user interface for more flexible control of Qlite system.Download Brochure
QL IP2SL
The QL IP2SL01 is a single port IP to Serial interface module. The module allows integrating audio visual equipment which can be controlled by serial commands. It allows control of such devices via iPad, Tablet or any other 3rd party android device. It has a robust construction with small size and can be installed easily hidden anywhere near the device to be controlled. The serial commands of the device are needed to set parameters for the serial port and program the commands.Download BrochureMotion Sensors

QL SPR01
The QL SPR01 is a PIR motion sensor module which switches the power to the load locally. It takes power from the supply to the load for operation. Download BrochureDownload Video
QL SMW01
The QL SMW01 is a microwave motion sensor module. The module takes power from the mains and switches the main phase to output load on sensing motion. Download BrochureDownload Video
QL SMW01R
The QL SMW01R is a flush mounting microwave motion sensor module. The module operates on mains power. The senor is activated by motion i.e. speed and size and being microwave technology it overcomes the temperature restrictions faced by normal IR based sensors. The operating temperature of the sensor ranges from -10°C to 60°C. The time delay, detection distance and daylight threshold is adjustable. It emits a high-frequency electro- magnetic wave 5.8GHz and receives its echo. The sensor detects the change in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command. Detection is possible through doors, panels of glasses thin walls. Download BrochureDownload Video
QL SMW101
The QL SMW101 is a microwave motion sensor module. The module sits on the QL NET bus and takes power from the bus. The senor is activated by motion i.e. speed and size and being microwave technology it overcomes the temperature restrictions faced by normal IR based sensors. The operating temperature of the sensor ranges from -20°C to 60°C. The time delay, detection distance and daylight threshold is adjustable with the help of DIP switches on the sensor. Download BrochureDownload Video
QL SMW101R
The QL SMW101R is a flush mounting microwave motion sensor module. The module sits on the QL NET bus and takes power from the bus. The senor is activated by motion i.e. speed and size and being microwave technology it overcomes the temperature restrictions faced by normal IR based sensors. The operating temperature of the sensor ranges from -10°C to 60°C. The time delay, detection distance and daylight threshold is adjustable. It emits a high-frequency electromagnetic wave 5.8GHz and receives its echo. The sensor detects the change in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command. Detection is possible through doors, panels of glasses thin walls. Download BrochureDownload Video